ارائه مدل عوامل تاثیرگذار بر توسعه مبلمان تندیسگرای معاصر با رویکرد فرا‌رشته‌‌ای

نوع مقاله : مقاله پژوهشی

نویسندگان

1 دانشجوی‌دکتری‌طراحی‌صنعتی،‌گروه‌طراحی‌صنعتی،‌دانشکده‌طراحی،‌دانشگاه‌هنر‌اسلامی‌تبریز،‌تبریز،‌ایران.‌

2 ‌استادیار‌گروه‌طراحی‌صنعتی،‌دانشکده‌طراحی،‌ دانشگاه‌هنر‌اسلامی‌تبریز،‌تبریز،‌ایران.

3 استادیار‌گروه‌طراحی‌صنعتی،‌دانشکده‌طراحی،‌دانشگاه‌هنر‌اسلامی‌ تبریز،‌تبریز،‌ایران.

4 استادیار‌گروه‌طراحی‌صنعتی،‌دانشکده‌طراحی،‌دانشگاه‌هنراسلامی‌تبریز،‌تبریز،‌ایران.

5 استاد‌گروه‌مجسمه‌سازی،‌دانشکده‌هنرهای‌زیبا،‌دانشگاه‌آتاترک،ارزروم،‌ترکیه.

چکیده

در عصر کنونی مبلمان ‌تندیسگرا راه ‌حلی مناسب برای پاسخگویی به نیازهای پیچیده و چندوجهی کاربران امروزی می‌باشد که علاوه بر رفع نیازهای فیزیکی، تامین‌کننده نیازهای معنوی و احساسی کاربران نیز می‌باشد و افزون بر محصولی کاربردی، به عنوان مجسمه نیز قابل ارزیابی هستند. پژوهش حاضر به دنبال شناسایی عوامل ظهور و توسعه مبلمان‌ تندیسگرا در عصر کنونی، و ارائه مدلی برای آن می‌باشد تا به عنوان ابزاری مفید جهت بهبود کیفیت این محصولات، مورد استفاده طراحان و تولیدکنندگان قرار گیرد. امروزه توسعه محصول، از تک‌رشته‌ای به فرارشته‌ای در حال گذر بوده و آموزش خطی سنتی طراحی، پاسخگوی نیازها و سلایق گسترده امروز نیست. مبلمان تندیسگرا را می‌توان محصولی فرارشته‌ای، حاصل ادغام مجسمه و مبلمان توصیف کرد؛ از این رو، پژوهش حاضر با نگرشی فرارشته‌ای، اصلی‌ترین عامل توسعه را همگرایی مجسمه و مبلمان و عوامل این همگرایی را به عنوان عوامل فرعی‌تر مورد بررسی قرار داد. عوامل فرهنگی، اقتصادی، پیشرفت تکنولوژی، توسعه معماری تندیسگرا، رویکردهای نوین (رویکردهای هنری و طراحی پست‌ مدرن و معاصر) به عنوان عوامل موثر در همگرایی مجسمه و مبلمان، و همچنین عوامل ثانویه توسعه مبلمان‌ تندیسگرا در دوره معاصر شناسایی شد. پژوهش حاضر از حیث نوع پژوهش کاربردی، از حیث ماهیت توصیفی-تحلیلی (توصیفی زمینه‌گرا) و از حیث نوع داده‌ها و تحلیل داده‌ها کیفی بوده؛ روش‌ و ابزار گردآوری اطلاعات نیز کتابخانه‌ای می‌باشد.

کلیدواژه‌ها

موضوعات


بحرینی، حسین؛ اعتصام، ایرج و حبیبی، محمد (1398). اثر بخشی سبک های هنری پس از سده بیستم بر معماری تندیس وار معاصر. نشریه هنرهای زیبا- هنرهای تجسمی. 24(1)، 19-28.
جوادیان، خدابخش و رضایی نوایی، سینا (1393). تندیسگرایی در معماری، کنگره ملی مهندسی عمران، دوره 8.
حسنی، آسیه (۱۳۹۹). استعاره در پسامدرنیسم و تولید کالا به مثابه هنر، [پایان نامه کارشناسی ارشد، دانشگاه الزهراء]. تهران.
خداداده، یاسمن (1383). تعامل معماری و طراحی صنعتی. نشریه هنرهای زیبا. شماره (17) . 61-68.
خسروی فر، شهلا (۱۳۹۱). مطالعه تطبیقی گرایشات فیگوراتیو در مجسمه‌سازی مدرن و پست مدرن. فصلنامه علمی-پژوهشی هنرهای تجسمی نقش مایه. 10(5)، ۸۳-۹۴.
خورسندی طاسکوه، علی (1388). تنوع گونه شناختی در آموزش و پژوهش میان رشته ای. فصلنامه مطالعات میان رشته ای در علوم انسانی. 1(2)، 57-83.
صافیان، محمدجواد (1391). تأملی در نسبت طراحی صنعتی و هنر. سوره اندیشه، تیر و مرداد (61 و 60 )، ‎197- 199.
طلایی، مینا و غلامعلی، حاتم (1390). سیر تحول مجسمه‌سازی ایران. فصلنامه علمی- پژوهشی هنرهای تجسمی نقش مایه. 4(9)، ۱۵-۲۶. فردپور، سارا و طیبی، فرزانه (1392). بررسی نگرش فولدینگ در مسائل استتیکی طراحی صنعتی. فصلنامه علمی - پژوهشی هنرهای تجسمی نقش مایه. 5(14)، 99-112.
موسویان، سمیه (1394). تحلیل زمینه های پیداش مجسمه‌سازی پست مدرن از ۱۹۶۰ تا ۱۹۸۰. فصلنامه علمی-پژوهشی پژوهشکده هنر معماری و شهرسازی نظر، 12(34)، ۵۹-۶۸.
مهدی، رضا (1392). شکل گیری و توسعه میان رشته ای ها در آموزش عالی: عوامل و الزامات. فصلنامه مطالعات میانرشته ای در علوم انسانی، 2(5), 91-117.
نبوی، سید عبدالامیر (1395). مطالعات میان رشته‌ای و تکثر روش شناختی. فصلنامه مطالعات میان رشته‌ای در علوم انسانی، 2(8)، 57-74.
DOI: 10.22035/isih.2016.216
 
Anyaegbu, U. (2019). An Adaptation of Tropical Plant Leaves as Motif for Sculptural. Awka Journal of Fine and Applied Arts, Vol. 6(2), 83-106.
Anyaegbu, U. (2016). Folklorization, Contemporaneity and Emotionality in the Sculptural Furniture of Tony Akudinobi. Awka Journal of Fine and Applied Arts. Vol. 3, 2016, 117-132.
Atatürk Higher Institution of Culture, Language and History, (1988). Turkish dictionary, volume 2. Ankara: Türk Dil Kurumu. (In Turkish)
Bahreini, H. & Etesam, I. & Mohammad Habibi, M. (2019). The Impact of Post-20th Century Artistic Styles on Contemporary Sculptural Architecture, Journal of Fine Arts - Visual Arts, Volume 24, Issue 1, 19-28. (In Persian)
Bajçinovci, B. & Jerliu, F. (2016). Integrated Design as an Evolutive Transdisciplinary Strategy, European Journal of Technology and Design 13(3):90-98. DOI:10.13187/ejtd.2016.13.90
Bilgin, N. (1986). Object Systems and Human-Object Relations in Various Socio-Cultural Groups. İzmir: Ege Üniversitesi Edebiyat Fakültesi. (In Turkish)
Boradkar, P. (2010). Designing Things: A Critical Introduction to the Culture of Objects. United Kingdom: Berg Publishers. Bozkurt, N. (1995). Theories of Art and Aesthetics. İstanbul: Sarmal. (In Turkish)
Clark, S. & Magrane, E. (2020). A Transdisciplinary Approach to Art–Science Collaboration, BioScience , 70(9), 821–829. https://doi.org/10.1093/biosci/biaa076
Darbellay, F. & Lubart, T. & Moody, Z. (2017). Creativity, Design Thinking and Interdisciplinarity. (eBook). DOI:10.1007/978-981-10-7524-7
Dousay, T.A. (2018). Designing for creativity in interdisciplinary Learning experiences, Educational Technology to Improve Quality and Access on a Global Scale, 43-56. DOI:10.1007/978-3-319-66227-5_5
Düzgün, E. (2017). An evaluation of furniture as an interior space component in terms of form-function-material in today's design comprehension (MSc Thesis). Mimar Sinan Fine Arts University, Institute of Science and Technology, Istanbul. (In Turkish)
Erdem, T. (2007). Overview of Furniture History and Art Deco (Master's Thesis). Istanbul Kültür University, Institute of Science and Technology. (In Turkish)
Evci, F., & Arcan, E. F. (1999). Approach to architectural design. Istanbul: Tasarım Yayın Grubu. (In Turkish)
Fardpour, S & Tayebi, F (2013). A study of Folding's approach to aesthetic issues in industrial design. Naqsh-e-Mayeh Journal of Visual Arts, 5(14), 99-112. (In Persian)
Gürcüm , H., & Kartal, S. (2017). Craft transformed into design with Bauhaus. Idil Art Journal, 6(34), 1767-1798. (In Turkish). DOI:10.7816/idil-06-34-06
Hassani, A (2010). Metaphor in Postmodernism and Commodity Production as Art, [Master's Thesis, Al-Zahra University]. Tehran. (In Persian)
Huntürk, Ö. (2016). Sculpture and Art Theories. Istanbul: Hayalperest.
Javadian, Kh & Rezaei Navai, S (2014). Sculpturalism in Architecture, National Civil Engineering Congress, Volume 8. (In Persian)
Karabıyık, K. (2016). Current digital technology effects of furniture design and production process (MSc Thesis). Beykent University, Department of Interior Design and Decoration. (In Turkish)
Kaya, Y. (2017). “Hybridity” as a New Approach in Contemporary Art. Journal of Art and Design, (20), 165-182. (In Turkish). https://doi.org/10.18603/sanatvetasarim.370751
Khodadadeh, Y (2004). Interaction of Architecture and Industrial Design. Fine Arts Journal, (17), 61-68. (In Persian) Khorsandi T, A (2009). Typological Diversity in Interdisciplinary Education and Research. Quarterly Journal of Interdisciplinary Studies in the Humanities, Fall 1(2), 57-83. (In Persian)
Khosravifar, Sh (2012). A comparative study of figurative tendencies in modern and postmodern sculpture. Naqsh-e-Mayeh, a quarterly scientific-research journal of visual arts, 10(5), Spring, 2012-2013. (In Persian)
Khoury, C. (2019). Variant and Variations On Furniture For Emotional Design Impact On Users. BAU Journal - Health and Wellbeing: Vol. 2: Iss. 1, Article 1. DOI: https://doi.org/10.54729/2789-8288.1022
Landis-Croft, M. (2018). Visual accessibility, functionality, and aesthetics of sculptural furniture (Bachelor's thesis). University of Oregon, Department of Product Design.
Leblanc, T. (2009). Transdisciplinary Design Approach. In: Kotzé, P., Wong, W., Jorge, J., Dix, A., Silva, P.A. (eds)
Creativity and HCI: From Experience to Design in Education. IFIP – International Federation for Information Processing, vol 289. Springer, Boston, MA.
Lévy, P. & Guénand, A. (2003). Including Interdisciplinarity To Industrial Design, 14th International Conference on Engineering Design, ICED 03.
Lovell, s. (2009). Limited Edition, Prototypes, One-Offs and Design Art Furniture. Basel: Birkhauser Verlag.
Ma, T, Zhang SH (2011),The Integrality of Architecture and Furniture Design, 2011 International Conference on Multimedia Technolgy. DOI: 10.1109/ICMT.2011.6002594
Mehdi, R (2013). Formation and Development of Interdisciplinary Studies in Higher Education: Factors and Requirements. Quarterly Journal of Interdisciplinary Studies in the Humanities, 2(5), 91-117. (In Persian)
Moiranoa, R. & Analía, S. & Štěpánekb, L. (2020). Creative interdisciplinary collaboration: A systematic literature Review, Thinking Skills and Creativity, (35):1-14. DOI:10.1016/j.tsc.2019.100626
Moreno, L. & Rogel, E. (2018). Transdisciplinary Design: Tamed complexity through new collaboration. Strategic Design Research Journal, 1. 42-50. DOI:10.4013/sdrj.2018.111.07
Moussavian, S (2015). Analysis of the contexts of the emergence of postmodern sculpture from 1960 to 1980. Quarterly Scientific Research Journal of the Nazar Institute of Art, Architecture and Urban Planning, Fall 12(34), 59-68. (In Persian) Nabavi, A (2016). Interdisciplinary Studies and Methodological Pluralism. Quarterly Journal of Interdisciplinary Studies in the Humanities, Spring 2(8), 57-74. DOI: 10.22035/isih.2016.216 . (In Persian)
Newell, W.H. (1998). Interdisciplinarity: Essays from the Literature. Ann Arbor, MI: University of Michigan, College Entrance Examination Board.
Özçam, I., & Uzunarslan, H.Ş. (2013). Symbolization of Furniture and Current Trends. Tasarım + Kuram, 9(16), 85-102. (In Turkish). https://doi.org/10.23835/tasarimkuram.239611
Pender, H. L. & Lamas, D. (2019). The Challenging Front Ends of Accelerated Transdisciplinary Design Processes, Proceedings of the 9th International Conference on Digital and Interactive Arts, (44),1-8. https://doi.org/10.1145/3359852.3359886
Peruccio, P.P., Menzardi, P.,and Vrenna, M. (2019) Transdisciplinary Knowledge: A Systemic Approach to Design Education, in Börekçi, N., Koçyıldırım, D., Korkut, F. and Jones, D. (eds.), Insider Knowledge, DRS Learn X Design Conference 2019, 9-12 July, Ankara, Turkey. doi: 10.21606/learnxdesign.2019.13064
Pournaderi, S. (2018). Architectural sculpture relationship after the XX. Century (MsC Thesis). Atatürk University, Institute of Fine Arts, Sculpture Department. (In Turkish)
Qureshi, A.J. & Gericke, K. & Blessing, L. (2013). Design process commonalities in trans-disciplinary design. Proceedings of the 19th International Conference on Engineering Design (ICED13), Design for Harmonies, Vol.1: Design Processes, Seoul, Korea, 19-22.08.2013. 459-468.
Safian, M (2012). A reflection on the relationship between industrial design and art. Surah Andisheh, Tir and Mordad (61 and 60), 197-199. (In Persian)
Sancar, S. (2018). Conceptually, functıon, functıonalıty and sculpture-functıon relationship (MSc Thesis). Atatürk University, Institute of Fine Arts, Sculpture Department. (In Turkish)
Talaei, M & Gholamali, Ha (2011). The Evolution of Iranian Sculpture. Quarterly Journal of Visual Arts. Winter 4(9), 15-26. (In Persian)
Tosun, Ö., Altunok, M., Küreli, İ., Kasal, A. (2023). Investigating the Effect of Cultural Characteristics of Societies on the Furniture Design Process and the Recognition of Original Turkish Furniture. Gazi University Journal of Science Part C: Design and Technology, 11(4), 966-983. (In Turkish). https://doi.org/10.29109/gujsc.1328057
Türkmen, Ö. (2014). Effects Of Cultural Differences On Furniture Design In Export: A Sample Furniture Design In Export (MsC Thesis). Ankara: Hacettepe University. (In Turkish).
Tüvör, M. (2020). Data art In Sculpture (MsC Thesis). Atatürk University, Institute of Fine Arts, Sculpture Department. (In Turkish).
West, R.E. (2016). Breaking Down Walls to Creativity Through Interdisciplinary Design. Educational Technology, 56(6), 47-52.
Woodward, I. (2007). Understanding Material Culture. London: Sage Publications.